How to mine GoByte (GBX) ?

[phm87]

Hi,


I was able to use Gateless Gate on my AMD/ATI RX470. Other miners may work (I heard about some forks of NSGminers).

I don't have RX580 and my rig have a special setup (nVidia and AMD on the same rig) that forbid me to test all miners. Some forks of sgminer adapted for yiimp mining pools should also work. Additionnal tests on AMD will be performed.

Please fel free to share all AMD miners that worked on this pool.

[godiet]

can you tell me how should I put my username and what should I put in the worker ?
-u <<username.worker>>

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:4233 -u should it be here ? like that: myname.something GRs75JMHz27vjMzSAu2SJuoFMZ

thanks

[d4v]

can you tell me how should I put my username and what should I put in the worker ?
-u <<username.worker>>

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:4233 -u should it be here ? like that: myname.something GRs75JMHz27vjMzSAu2SJuoFMZ

thanks

For mining GBX, please try this configuration :

Code: Select all

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:4236 -u GTjB7XXf7xdNfcbTiZ7W4WxVsUh4kMXxva.worker01 -p c=GBX

Edit : Using the worker parameters allow you to identify exactly each of your Rigs on our wallet page https://www.unimining.net/?address=[Your_Wallet].

[godiet]

Thanks,
Is there a reason you wrote :4236 instead of 4233, as was written somewhere else in this theard ?

[d4v]

Thanks,
Is there a reason you wrote :4236 instead of 4233, as was written somewhere else in this theard ?

Hi,

I have adapted this thread with the correct port. It's essentially performance reasons. It's trully recommanded by our team to uses the dedicated port.

For more details refer to this thread : viewtopic.php?t=162

[zazazaaz]

Hello, author. I am a miner from China. I want to inquire about why I follow your tutorials.
HTTP request failed:Could not resolve host:stratum

[godiet]

Hi,
While monitoring the mining using "mining observer", I see my hash rate is ~4-6 MH/s, is it ok (sounds like very small number).
It also shows that it worth 0.0636 gbx per day.
My rig has 6 X 1070 nvidia cards.
Tnx

[phm87]

Hello, author. I am a miner from China. I want to inquire about why I follow your tutorials.
HTTP request failed:Could not resolve host:stratum

Hi,


Can you tell me the Operating System you're using (windows, linux), the miner application used (ccminer, sgminer, nsgminer, gateless), your batch file used to launch the miner and can you also tell me if you are able to reach the website on a web browser ?

I hope that your problem will be fixed in a short while.

Thank you,


Have a nice mining!

[phm87]

Hi,
While monitoring the mining using "mining observer", I see my hash rate is ~4-6 MH/s, is it ok (sounds like very small number).
It also shows that it worth 0.0636 gbx per day.
My rig has 6 X 1070 nvidia cards.
Tnx

Hi,


I have 2 GTX 1070 with a small overclock of memory, GPU core but lower TDP, I have around 1.2 to 1.7 MH/s reported on the miner aplication and an average of 1.2 of pool website (average on a long time period as pool calculated hashrated based on difficulty of received valid shares so it can go higher and lower in the time).

We had some performances issues on some stratums recently. As miners count increase and hashrate also increase, hashrate decrease appeared as a recurring issue. To solve it, we had to automatically and manually restart stratums regularly.

A better solution (load balancing of more stratums) was introduced few days ago. Some fine tuning was performed to reduce stratum authentication failures, stratum interruptions and invalid shares.

Today, Load balancing of stratums and dedicated ports were added to blake2s.

If you encounter problems, please report so that we can investigate.

Sorry for these issue and thank you for your patiente,


Have a nice mining!

[Cryptoman]

Hi,
While monitoring the mining using "mining observer", I see my hash rate is ~4-6 MH/s, is it ok (sounds like very small number).
It also shows that it worth 0.0636 gbx per day.
My rig has 6 X 1070 nvidia cards.
Tnx

Hi,


I have 2 GTX 1070 with a small overclock of memory, GPU core but lower TDP, I have around 1.2 to 1.7 MH/s reported on the miner aplication and an average of 1.2 of pool website (average on a long time period as pool calculated hashrated based on difficulty of received valid shares so it can go higher and lower in the time).

We had some performances issues on some stratums recently. As miners count increase and hashrate also increase, hashrate decrease appeared as a recurring issue. To solve it, we had to automatically and manually restart stratums regularly.

A better solution (load balancing of more stratums) was introduced few days ago. Some fine tuning was performed to reduce stratum authentication failures, stratum interruptions and invalid shares.

Today, Load balancing of stratums and dedicated ports were added to blake2s.

If you encounter problems, please report so that we can investigate.

Sorry for these issue and thank you for your patiente,


Have a nice mining!

Performance is greatly improved. Thanks